RTC Alarm Power On
Use this item to enable or disable RTC (Real Time Clock) to power on the system.
ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is [Disabled]. Please set this option to [Enabled] if you plan to use this motherboard to submit Windows® VistaTM certification.
3.4.4 IDE Configuration
| BIOS SETUP UTILITY |
| |
Advanced |
|
| |
| Configure onboard | ||
IDE Configuration | serial ATA | ||
| controller. | ||
Onboard SATA Controller | [Enabled] |
| |
SATA Operation Mode | [IDE] |
| |
IDE1 Master | [Hard Disk] |
| |
IDE1 Slave | [Not Detected] |
| |
SATAII_1 | [Not Detected] |
| |
SATAII_2 | [Not Detected] |
| |
SATAII_3 | [Not Detected] |
| |
SATAII_4 | [Not Detected] | Select Screen | |
SATAII_5 | [Not Detected] | ||
Select Item | |||
SATAII_6 | [Not Detected] | ||
| +- | Change Option | |
| F1 | General Help | |
| F9 | Load Defaults | |
| F10 | Save and Exit | |
| ESC | Exit | |
v02.54 (C) Copyright | |||
OnBoard SATA Controller
Use this item to enable or disable the “OnBoard SATA Controller” feature.
SATA Operation Mode
Use this item to adjust SATA Operation Mode. The default value of this option is [IDE]. If you want to operate RAID function on SATA / SATAII HDDs, please select [RAID]. Configuration options: [AHCI], [RAID] and [IDE].
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will use the “IDE1 Master” as the example in the following instruction, which can be applied to the configurations of “IDE1 Slave” as well.
5 1
