AUVI Technologies WIP20S manual Hardware Connection, Connecting the WIP20

Hardware Connection Section 4

This section explains how to physically connect the WIP20 to your computer.

Connecting the WIP20

1.Connect the line-in cables to your sound card on the back of your computer. Pink = MIC jack

Green = SPKR jack

2.Connect the line-in cables to the WIP20. Pink = Mic in

Green = Audio in

3.Connect the AC adapter to the “Power in” jack on the back of the WIP20.

NOTE: Do not plug use a power cord other than the one supplied with the WIP20. Doing so could cause severe damage to the unit and will void its warranty.

4.Connect a traditional or cordless phone to the RJ-11 jack on the front of the WIP20.

NOTE: Do not plug the WIP20 directly into a wall jack. Doing so could cause severe damage to the unit and will void the warranty.

09