AUVI Technologies WIP20S manual Basic Operations Guide

Section 6

Basic Operations Guide

Below are the basic operations to make and receive calls from the phone connected to the WIP20.

Assign a Skype™ user name to a speed-dial using Auvi Interface

Call a Skype™ user name using speed-dial

Receive incoming calls

End a call

Put call on hold

Make a call to an ordinary phone number

This option requires SkypeOut, a paid service from Skype™.

Other Skype™ software features not using a telephone connected to WIP20

NOTE:

1.Open the Auvi Interface and click “Contacts”.

2.Click New and fill in the necessary text fields.

3.Click Save.

1.Pick up telephone handset connected to the WIP20.

2.Listen for the dial-tone.

3.Dial the two-digit speed-dial number, followed by “#”. Example: 00#

Pick up telephone handset connected to the WIP20.

When you wish to end a call, simply hang up the handset.

To place a caller on “Hold”, simply locate and press the “Flash” button on your telephone. To continue the call, press the “Flash” button again.

1.Pick up telephone handset connected to the WIP20.

2.Listen for the dial-tone.

3.Dial country code + area code + seven digit phone number + “#”.

Example (U.S. phone number): 15555555555#

Example (Hong Kong phone number): 852123456789#

NOTE: The “#” key must be pressed to connect the call.

Visit www.skype.com.

Calls can be initiated and received through the Skype software and transfered to the phone handset.

Double-click the contact to call or after answering an incoming call, pick up the handset. You will hear a background tune (this is the dial tone if placing a call through the phone). Simply push the * button to cancel the tune and start/continue your conversation.

15