|
|
| FEATURES AND SPECIFICATIONS PAGE 5 | ||||
|
|
|
|
|
| ||
| Installation Options: | Features: |
|
|
| ||
|
|
| ¥ | Works During Power Outages |
|
| |
| ¥ | Freestanding |
| (millivolt system) |
|
|
|
| ¥ | High Efficiency; Up to 80% for Natural Gas, |
| ||||
|
|
|
| ||||
| ¥ | Masonry Fireplace Insert |
| 82% for LP (Steady State) |
|
| |
| ¥ | Optional Thermostat or Remote Control |
| ||||
| ¥ | ¥ | Realistic "Wood Fire" Look |
|
| ||
| ¥ | Convenient Operating Controls |
|
| |||
|
| Fireplace Insert | ¥ |
|
| ||
|
|
| ¥ | Quiet Blower for Effective Heat Distribution |
| ||
|
|
| ¥ | Low Maintenance |
|
|
|
| Heating Specifications: |
|
|
|
|
| |
|
| Approximate Heating Capacity (in square feet)* | 600 - 1600 |
| |||
|
| AFUE (Annual Fuel Utilization Efficiency) |
| 68 % |
|
| |
|
|
|
| Natural Gas | LP (Propane) | ||
|
| High Burn Input Rate (In BTU's) |
| 40,000 |
| 38,000 |
|
|
| Low Burn Input Rate (In BTU's) |
| 23,000 |
| 20,000 |
|
|
| Efficiency** |
| 80% |
| 82% |
|
*Heating capacity will vary with the home's floor plan and insulation, natural gas or Propane BTU rating, and outside temperature.
**Efficiency rating is a product of thermal efficiency rating determined under continuous operation independent of installed system. To measure the net BTU's, multiply the BTU input by the efficiency percentage (80% for natural gas, 82% for LP).
Dimensions
The base of the | Measure Clearances | Weight: 175 Lbs. | The base of the starter section |
from the Upper Top | is 2" below the upper top. | ||
starter section |
|
|
|
is 2" below the |
|
|
|
upper top. |
|
|
|
|
|
| |
|
| 8" Panels: 28"* | |
|
|
| |
| 10" Panels: 30"* | ||
| 12" Panels: 32"* |
|
|
| ||
|
|
| |
| Pedestal: |
|
|
| Brass, Cast Legs: 28" |
|
|
| Black Legs: | 8" Panels: 40"* |
|
|
|
| |
|
| 10" Panels: 44"* | 13"* |
|
| 12" Panels: 48"* | |
|
|
| |
|
| * Includes | |
|
|
|
Fuel:
Emissions:
Electrical Specifications:
The heater is designed either for natural gas or for propane (but not for both). Check the sticker on the top of the gas control valve.
This unit has passed the ANSI emission standards for vented room heaters as tested by OMNI Environmental Services, Inc.
115 Volts, 1.3 Amps, 60 Hz (150 watts on high)