2420 Options Page 17
2420 User Guide Page 17
IP Office 40DHB0002USEG - Issue 1 (29/04/2003)
Call Log Setup
Through the Option menu you can specify which types of calls should be
included in the 2420's call log. See "Setting Which Calls are Logged" on
page 14.
Switch Visual Ring On/Off
With visual ringing on, the phones lamp flashes when the phone is ringing.
1. Press Option. If Option is not shown press to exit the
current screen.
2. Press Visual Ring. A menu showing the current setting appears.
3. To change the current setting, either press the key next to the
setting or press Yes/No.
4. Do one of the following:
• To save the setting and return to the options menu, press
Save. You will hear a confirmation tone.
• To return to the options menu without saving any changes, press
Cancel.
• To return to the call handling screen without saving any changes,
press .
Using Self Test
Self test can be used to display information about the phone and to check
operation of the lamps and display. The information may be required by a
telephone system maintainer.
1. Press Option. If Option is not shown press to exit the
current screen.
2. Press Self Test. The a screen of information appears.
3. Press and hold the Test key. The screen lines should all go black
and all the phone lamps should come on.
4. Do one of the following:
• To return to the options menu, press Done.
• To return to the call handling screen, press .
Selecting the Display Mode
See "Display Mode" on page 21.