Display Keys Page 29 2420 User Guide Page 29 IP Office 40DHB0002USEG - Issue 1 (29/04/2003) CnfRV - Conference Meet Me
Allows the extension to join a specified conference.
This function requires the conference number to be entered when
programmed. That number is then shown next to CnfRV. This function
cannot be programmed through the phone by the user.
Pressing CnfRV places the extension into the specified conference.
Note that the number of conference parties allowed at any time is
determined by the telephone system.
[User | Button Programming | Advanced | Call | Conference Meet Me]
Conf+ - Conference Add
Places all calls held by the extension into a conference.
This function does not require any data entered when programmed. This
function cannot be programmed through the phone by the user.
Pressing Conf+ places the extension and any calls it has put on hold
into a conference. This function will not work if the extension has a current
call.
[User | Button Programming | Advanced | Call | Conference Add]
CPark - Call Park (!)
Park the current call.
This function can be programmed with or without data. This function can be
programmed through the phone by the user using an Admin key.
If programmed with data, the number entered is shown next to the
CPark key and is the number assigned to the parked call.
If programmed without data, the key displays just CPark. Calls parked
using this key are is assigned a number based on the parking extensions
number. For example, extension 290's first parked call is numbered 2900,
its next 2901 if 2900 is still parked and so on. If calls are parked using this
key, CPark is shown with a symbol. Pressing the key again displays the
user's parked calls and allow them to be retrieved.
If not retrieved elsewhere, a parked call will recall to the parking extension
after a set time.
[User | Button Programming | Emulation | Call Park]
See also:
• "Park - Park" on page 43.
• "Park - Call Park to Other Extension (!)" on page 44.
• "Ride - Ride Call" on page 49.