Page 36 - Function Key Programming | Function Keys |
When drop is used, silence is returned to the user rather than dial tone. This is intended operation, reflecting that Drop is mainly used by call center headset users.
[User Digital Telephony Emulation Drop]
DTone - Secondary Dial Tone
Return secondary dial tone to the user.
This function is currently not supported on the 5410 telephone.
Emrgy - Dial Emergency
Dials a specified number regardless of any call barring applied to the user.
This function requires entry of a number to dial when programmed. That number is then shown next to Emrgy. This function cannot be programmed through the phone by the user.
[User Digital Telephony Advanced Dial Dial Emergency]
Flash - Flash Hook (#)
Send a hook flash signal to the currently connected line.
This function does not require any data entered when programmed. This function cannot be programmed through the phone by the user. This function can be programmed through the phone by the user using an 
Admin 1 key.
[User Digital Telephony Advanced Miscellaneous Flash Hook]
FolTo - Follow Me To
Forwards calls from this extension to the specified target.
This function requires the target extension to be entered when programmed. The extension number is then shown next to FolTo. This function cannot be programmed through the phone by the user.
Pressing 
FolTo sets the extension's Follow Me To number to the specified extension and switches follow me use on. Whilst on, FolTo is shown with a 
symbol. Press 
FolTo again to switch off.
[User Digital Telephony Advanced Follow Me Follow Me To]
FwBNo - Forward On Busy Number
Sets the extensions forwarding number for use with forward on busy and forward on no answer.
This feature requires the target number to be entered when programmed. The number set is shown next to FwBNo. This function cannot be programmed through the phone by the user.
Page 36 - Function Keys | IP Office 5410 User’s Guide |
Function Key Programming | 40DHB0002UKEY – Issue 1 (7th February 2005) |
