Page 44 - Function Key Programming | Function Keys |
Intru - Call Intrude on page 46.
•Recor - Call Record on page 53.
•Steal - Call Steal on page 53.
Login - Extn Login
Logs the current user onto the extension.
This function does not require any data to be entered when programmed. The user cannot program this function through the phone. Pressing the soft key login prompts the user Enter Extn:. The user enters the desired extension and presses the soft function key Next. The user is prompted for the password. The user enters the password and presses the soft function key “Done.”
[User Digital Telephony Advanced Extn Extn Login]
Logof - Extn Logout
Logs the current user off the extension.
This function does not required any data to be entered when programmed. This function cannot be programmed through the phone by the user.
Pressing 
Logof logs the current user off the extension. A new user must then log on to use the extension or dial *36 to
[User Digital Telephony Advanced Extn Extn Logout]
Music - Hold Music
Plays the telephone system's music on hold.
This function does not required any data to be entered when programmed. This function cannot be programmed through the phone by the user.
Pressing 
Music plays the telephone system's music on hold through the extension.
[User Digital Telephony Advanced Hold Hold Music]
NATim - Set No Answer Time
Sets the extension's no answer time after which ringing calls are forwarded or go to voicemail.
This function requires the time in seconds to be entered when programmed. The value is shown next to NATim. This function cannot be programmed through the phone by the user.
Pressing 
NATim sets the extension's no answer time to the indicated number of seconds. This time is used to set a delay between ending one call and the next call ringing the extension (the waiting call may be indicated on the display however).
[User Digital Telephony Advanced Set Set No Answer Time]
See also:
•VMOff - Voicemail Offon page 55.
OCSeq - Set Outside Call Sequence
Sets the ringing pattern (sequence) used for internal calls.
This function is currently not supported on the 5420 telephone.
Page - Page
Page the specified target extension or group. The target must be capable of
This function requires the target extension or group number to be specified when programmed. The target is then shown next to 
Page. This function cannot be programmed through the phone by the user.
Page 44 - Function Keys | IP Office 5410 User’s Guide |
Function Key Programming | 40DHB0002UKEY – Issue 1 (7th February 2005) |
