Page 42 - Function Key Programming

Function Keys

Hold - Hold Call

Place the current call on hold at the central office. This function is not supported in the USA.

If no exchange slot number is specified when the function is programmed, central office slot 0 is used.

Pressing Hold is only supported if the central office provides a Q.931 hold facility. It is not the same as local hold provided by the IP Office.

[User Digital Telephony Advanced Hold Hold Call]

See also:

Rtriv - Retrieve Call on page 52.

HoldCW - Hold Call Waiting

Place the current call on hold and connects any call waiting. This function is not supported in the USA.

This function does not required any data to be entered when programmed. This function cannot be programmed through the phone by the user.

Pressing HoldCW places the current call on hold and connects any call waiting without any ringing.

[User Digital Telephony Advanced Hold Hold CW]

IAuto - Automatic Intercom

Connects call to the extension without ringing.

This function requires entry of an extension number when programmed. The target extension must be support handsfree operation. This function cannot be programmed through the phone by the user.

Press IAuto connects the call without any ringing at the remote extension. If the target extension is busy or not available, the call will follow any forwarding or diversion to voicemail set.

[User Digital Telephony Emulation Automatic Intercom]

ICSeq - Set Inside Call Sequence

Sets the ringing pattern (sequence) used for internal calls.

This function is currently not supported on the 5410 telephone.

IDial - Dial Intercom

The same as IAuto - Automatic Intercom on page 43. This function cannot be programmed through the phone by the user.

[User Digital Telephony Emulation Dial Intercom]

Inclu - Dial Inclusion

Intrudes on a call in progress at the target extension.

This function is currently not supported on the 5410 telephone.

Page 42 - Function Keys

IP Office 5410 User’s Guide

Function Key Programming

40DHB0002UKEY – Issue 1 (7th February 2005)

Page 42
Image 42
Avaya 5410 manual Hold Hold Call, HoldCW Hold Call Waiting, IAuto Automatic Intercom, ICSeq Set Inside Call Sequence