Function Key ProgrammingFunction Keys - Page 53
VMRB+ - Voicemail Ringback On
Switches voicemail ringback for the extension on/off.
This function does not require any data entered when programmed. This function cannot be programmed through the phone by the user.
The 
VMRB+ key toggles voicemail ringback for the extension on/off. When on, VMRB+ is shown with a 
symbol and the extension is called when new messages are left in its mailbox.
[User Digital Telephony Advanced Voicemail Voicemail Ringback On]
VMCol - Voicemail Collect
Accesses a specified voicemail mailbox to collect or leave messages.
This function requires entry of the target mailbox name prefixed by either ? to collect messages or # to leave a message. If just ? or # is entered then the calling extension's mailbox is assumed. This function cannot be programmed through the phone by the user.
The 
VMCol key appears followed by the mailbox name.
[User Digital Telephony Advanced Voicemail Voicemail Collect]
VMOff - Voicemail Off
Disables access to the user’s voicemail box.
This function does not require any data entered when programmed. This function cannot be programmed through the phone by the user.
The 
VMOff key switches voicemail operation for the extension off.
[User Digital Telephony Advanced Voicemail Voicemail Off]
VMOn - Voicemail On
Enables/disables access to the user’s voicemail box.
This function does not require any data entered when programmed. This function cannot be programmed through the phone by the user.
The 
VMOn key toggles voicemail operation for the extension on/off. When voicemail is on, VMOn is shown with a 
symbol.
[User Digital Telephony Advanced Voicemail Voicemail On]
WUTim - Set Wrap Up Time
Sets the extension's busy wrap up time to be inserted between calls.
This function requires the time in seconds to be entered when programmed. The value is shown next to WUTim. This function cannot be programmed through the phone by the user.
Pressing 
WUTim sets the extension's busy wrap up time to the indicated number of seconds. This time is used to set a delay between ending one call and the next call ringing the extension (the waiting call may be indicated on the display however).
[User Digital Telephony Advanced Set Set Wrap Up Time]
See also:
•NATim - Set No Answer Time on page 46.
IP Office 5410 User’s Guide | Function Keys - Page 53 |
40DHB0002UKEY – Issue 1 (7th February 2005) | Function Key Programming |
