Page 54 - Introduction | System Features |
System Features
Introduction
As well as your phones specific features, you can access a number of system features by dialing short codes.
These instructions are for the system's default configuration. They assume that you are using the default feature codes. It also assumes that you have full access to all features and the public telephone network
Making Calls
Internal Calls:
If your System Administrator has allocated you the Ring Back When Free feature (see page 50) under a dial pad digit, you can:
1.When you call an extension that does not answer or is busy, press the 
RBak feature key to set a callback on that extension.
2.When the extension you called becomes free, your phone will ring (a burst of three rings).
3.Lift the handset and the extension is called automatically.
External calls:
To make an external call, either dial the number (prefixed by the access code if required) or use a speed dial code (contact your system manager for a list of your speed codes).
If you hear busy tone while dialing, then the call may be barred. Your system manager can bar certain calls, such as those to premium rate numbers and international calls
Answering Calls
Ringing at your own extension:
Simply pick up the handset. When in headset mode, press the button associated with the alerting call.
The default ringing cadences are:
•Internal calls have a single ring cadence
•External calls have a double ring cadence.
These can be changed by your System Administrator.
Ringing at another extension:
You can answer from your own phone by using Call
-*30 to answer a call ringing anywhere.
-*31 to answer a call within your group.
-*32*201# to answer the call for a particular extension, in this example 201.
Note: If your phone rings for any longer than a specified period (15 seconds in default), any
Page 54 - System Features | IP Office 5410 User’s Guide |
Introduction | 40DHB0002UKEY – Issue 1 (7th February 2005) |
