Function Key ProgrammingFunction Keys - Page 51
SAC - Send All Calls (!) Switch do not disturb on/off.
This function does not require any data entered when programmed. This function can be programmed through the phone by the user using an 
Admin key.
The 
SAC key switches "do not disturb" on/off. When on, SAC is shown with a 
symbol and the display includes an N (No calls).
When SAC is on, callers receive busy tone or are diverted to voicemail. For each user the System Administrator can set which numbers can still call when SAC is on. If the extension user has Phone Manager, they can set those numbers themselves. With a call already connected and another call already alerting, activating SAC will not affect the already alerting call.
[User Digital Telephony Emulation Send All Calls]
See also:
•DNDOn - Do Not Disturb On on page 36.
Spres - AD Suppress (!)
Replace the display of dialed digits with s characters.
This function does not require any data entered when programmed. This function can be programmed through the phone by the user using an 
Admin key.
The programmed 
Spres key toggles the display of dialed digits on/off. When on, Spres is shown with a 
symbol and each dialed digit is replaced by s on the display.
[User Digital Telephony Emulation AD Suppress]
Steal - Call Steal
Take over a call from a specified extension or retrieve a call just transferred or forwarded. This function cannot be programmed through the phone by the user.
If a target extension number is entered when this function is programmed, 
Steal displays that number. Pressing 
Steal when the target extension has a call will take over the call.
If no target extension number is entered when the function is programmed, 
Steal retrieves the last calls transferred from the extension. This includes calls diverted to voicemail.
Notes: 1. Target extension must not have Cannot Intrude set.
2. Extension with Steal allocated must also have Can Intrude set.
[User Digital Telephony Advanced Call Call Steal]
SusCW - Suspend CW
Suspend the current call at the exchange and answer the waiting call.
If no exchange slot number is specified when the function is programmed, exchange slot 0 is used. This function cannot be programmed through the phone by the user.
Pressing 
SusCW is only supported if the exchange provides a Q.931 suspend call facility.
[User Digital Telephony Advanced Suspend Suspend CW]
See also:
•Resum - Resume Call on page 51.
IP Office 5410 User’s Guide | Function Keys - Page 51 |
40DHB0002UKEY – Issue 1 (7th February 2005) | Function Key Programming |
