ExpertNet Lite Assessment Tool - User Guide
Discover Topology | Select this option if you want the Controller to discover network |
| topology from scratch. Steps 2.1 and 2.2 in the Configuration Wizard |
| are enabled. You must have SNMP access to network routers to use |
| this option. |
|
|
Use Existing Topology | Select this option if you want the Controller to reuse the existing |
| topology file from a previous discovery. |
|
|
No Topology | Select this option if you do not want to (or cannot) discover network |
| paths. The Network Tests > Discover Ping Tests entry in the main |
| menu bar will be disabled, but you will still be able to add Ping tests |
| manually. You may want to consider this option if SNMP access to |
| network routers is not allowed. |
|
|
Step 2.1: Location to Start Network Discovery
Steps 2.1 and 2.2 will only display if you selected the Discover Topology option.
Use default gateway | Select this option if you want the Controller to use the default gateway |
| configured on the Controller PC to start network discovery from. |
|
|
Use this hostname or | Select this option if you want the Controller to use a specified initial |
IP address | gateway to start network discovery from. |
|
|
8
