| ExpertNet Lite Assessment Tool - User Guide | |
|
|
|
DSCP (Differentiated |
| This column is useful for determining DSCP problems on the |
Services Code Point) |
| network. The DSCP is shown in a slash notation. The first value is |
|
| the |
|
| with the Ping/RTP packets. The second values show all the DSCP |
|
| values that were found in the network in a comma separated |
|
| format. For example: |
|
| 4646,20/30,0 - means 46 was the priority code of packets sent |
|
| into the network. On the forward link, packets were received with |
|
| the setting 46 and 20, and on the backward link, it found packets |
|
| with the setting 30 and 0. This indicates that the network isn't |
|
| preserving the DSCP value. |
|
|
|
Number of calls |
| Indicates the number of calls that will be run simultaneously on |
|
| that link. Can run up to 10 calls on a single network link at the |
|
| same time. |
|
|
|
Delay/Loss/Jitter |
| Each column indicates the QoS metric for that column. These will |
|
| only be populated for RTP tests when a result is obtained, which |
|
| is at the end of the call length that is configured for that test. |
|
| These columns will be blank for ping tests. |
|
| The Traffic Simulator will occasionally fail computing a test and |
|
| this is represented in the controller as 100% loss and the status |
|
| Failure. This does not mean your network actually has 100% loss |
|
| on that link and this can be easily confirmed with a ping test. |
|
| These results are thrown away for the purposes of graphing so it |
|
| will not affect the reports. |
|
|
|
When ELAT completes the data collection, it will upload the dataset automatically to the FTP server as configured in the Configuration Wizard.
22