ExpertNet Lite Assessment Tool - User Guide
Step 4: SNMP Settings
On this page you can set values for SNMP requests sent on the network. These settings rarely need to be changed.
Poll Interval of Single | Poll interval defines the interval for sending SNMP requests to a single |
Node | node on the network. The default Poll Interval is 120 seconds. |
|
|
Maximum Total | Used to set network throttling by limiting the number of SNMP requests |
Number of Polls/Sec | per second sent to all nodes. This setting takes precedence over Poll |
| Interval: if Poll Interval is too small, it is automatically recalculated by |
| the Controller to satisfy the Maximum Total). Default setting is 2 polls |
| per second. |
|
|
Number of Request | Defines the number of times the SNMP request is sent to a network |
Retries | device if the response does not arrive within the period set in the |
| Request Timeout field. The default setting is 1. |
|
|
Request Timeout | Defines how many seconds the Controller will wait for a response to an |
(secs) | SNMP request before sending a retry. The default setting is 5 seconds. |
|
|
11