ExpertNet Lite Assessment Tool - User Guide
To Endpoint | Host name or IP address of a device that you want to be an edge device |
| of the new ping test path. |
|
|
Protocol | Select a protocol to discover and ping this path. UDP is the |
| recommended protocol. |
|
|
Path Tracerouting | Check this box if you want to use traceroute to discover and ping this |
| path. If the button is not checked, only the edge device will be pinged. |
| With Traceroute: The Controller collects Round Trip Time (RTT) data |
| from ping paths by |
| information is displayed in the Path Details View. The SNMP statistics |
| are collected only for ingress and egress interfaces of every router. |
| Without Traceroute: The Controller collects RTT data from ping |
| paths with traceroute by pinging every target directly. The SNMP |
| statistics are collected for all Layer 3 interfaces of the target device. |
|
|
SNMP Polling | Check this box if you want the ELAT Controller to collect SNMP statistics |
| (CPU and interface utilization) for devices on the test path. |
|
|
19