Avaya IPTM96-CM601 manual Intra-Switch Cdr

StepDescription

5.If the Intra-switch CDR field is set to y on Page 1 of the CDR SYSTEM PARAMETERS form, then enter the change intra-switch-cdrcommand to define the extensions that will be subjected to call detail recording. In the Assigned Members field, enter the specific extensions whose usage will be tracked with the CDR records.

change intra-switch-cdr				Page 1 of 3
		INTRA-SWITCH CDR
			Assigned Members: 8	of 5000 administered
	Extension	Extension	Extension	Extension
	10001
	10002
	10003
	10004
	10005
	10006
	10007
	10008

6.For each trunk group for which CDR records are desired, verify that CDR reporting is enabled. Enter the change trunk-group n command, where n is the trunk group number, to verify that the CDR Reports field is set to y. Repeat for all trunk groups to be reported.

change trunk-group 6				Page	1 of 21
			TRUNK GROUP
Group Number:	6		Group Type: sip	CDR Reports: y
Group Name:	SIP Trunk to SM6		COR: 1	TN: 1	TAC: #06
Direction:	two-way	Outgoing Display? y
Dial Access?	n			Night Service:
Queue Length:	0

Service Type: tie	Auth Code? n
	Member Assignment Method: auto
	Signaling Group:	6
	Number of Members:	20

JC; Reviewed:	Solution & Interoperability Test Lab Application Notes	18 of 30
SPOC 6/16/2011	©2011 Avaya Inc. All Rights Reserved.	IPTM96-CM601