Advanced features
342
key/entry, the IP Deskphone attempts to un-hold the call after the key or
entry call completes.
For example:
• A is talking to B when A invokes their Speed Dial List and selects an
entry.
• Selection/invocation of a Speed Dial List entry places the A-B call on
hold and place another outgoing call to URI specified in the Speed
Dial List entry, let's say C.
• When the A-C call completes, if the auto retrieve flag is enabled for
the Speed Dial, then the IP Deskphone attempts to take call A-B off
hold. This may not always happen if the IP Deskphone receives
another call during the A-C call, or if the A-B call state is changed
while A-C is active.
USB Flash memory device support
The IP Deskphone supports the browsing of files on a USB Flash memory
device. A simple file browser allows you to select an image file (or other
type of file) and upload onto the IP Deskphone file system. The file
manager also allows you to browse and copy certain files from the phone
file system onto a USB flash drive.
After you select the File Manager menu by choosing Services menu, you
can navigate to the IP Deskphone file system and any USB drives
attached. From there, you can either copy a file from the phone onto their
USB drive or from the USB drive to the phone.
After you select a File manager, and there are no USB drives plugged into
the IP Deskphone, the root screen of the IP Deskphone file system
screen the screen that appears.
Figure 69 on page 343 displays the root screen of the IP Deskphone file
system.