4.Power button / Power Indicator

Press momentarily to turn on the system.

Press and hold for at least 4 seconds to turn off the system.

Persistent green light indicates the Power is ON

5.Keyboard

6.Touchpad

7.LED Status Indicator

LED Graphic Symbol

Indication

Blue light indicates the WLAN module is active.

Set the Bluetooth ON to use the Bluetooth function.

If the <Caps Lock> key is pressed, the <Caps Lock> control will be lighted.

In this state, you can enter capital letters without pressing the <Shift> key.

If the <Num Lock> function is active, the <Num Lock> control will be lighted.

Press the <Num Lock> key to use the numeric pad.

Green light indicates the hard drive and/or optical drive is being accessed.

Blinking orange light indicates the battery is being charged.

Blinking red light indicates the battery power is low when the system is turned ON.

Persistent green light indicates the Power is ON.

8. Touchpad left / Right buttons

Chapter 1 Introduction 5

Page 19
Image 19
AVERATEC N3400 manual Touchpad left / Right buttons