Axion ZT18533, CZT2142 manual Front To Back Leveling - 33” Deck

A

B

Figure 53. Orient Blades Front-to-Back

Front To Back Leveling - 33” Deck

If the cut is uneven, the mower may need leveling. Unequal or improper tire pressure may also cause an uneven cut. See CHECK TIRE PRESSURE.

1. Turn the blade front-to-back as shown in Figure 53.	Figure 54. Front-to-Back Leveling
Reproduction
Measure the distance from the ground to front tip of	A. Hitch Rod
blade, and from ground to rear tip of blade (Figures	B. Jam Nuts (hidden from view)

53). Front tip should be 1/8"-1/4" (3-6 mm) higher than rear tip. If not, proceed to step 2.

2. The front mower hitch rod (A, Figure 54) is used to adjust front-to-back leveling. To raise or lower he front of mower deck, adjust the front jam nu s (C) both sides of the hitch rod (A) to adjust the deck level.

35