Engine runs, but

Transmission release levers in PUSH

Move levers to DRIVE positions.

rider will not

positions.

 

drive.

 

 

Drive belt slips.

Clean or replace belt as necessary.

 

 

 

 

Belt is broken.

Replace drive belt. Contact your local authorized dealer.

 

 

 

 

Parking brake is not fully released.

Contact your local authorized dealer.

 

 

 

Parking brake

Parking brake is incorrectly adjusted.

See Service & Adjustments Section.

will not hold.

 

 

 

 

 

Rider steers or

Improper tire inflation.

See Maintenance Section.

handles poorly.

 

 

Steering linkage is loose.

Check and tighten any loose connections.

 

 

 

 

Rider tracks to

Ground speed adjustment knobs not

See SPEED BALANCING ADJUSTMENT in Service &

one side.

adjusted.

Adjustments section.

 

 

 

Troubleshooting the Mower

PROBLEM

CAUSE

REMEDY

 

 

 

Mower cutting

Cutting height motor screw dirty or requires

Thoroughly clean and lubricate cutting height motor

height does not

Underside of mowerReproductiondeck dirty.Remove mower deck and clean underside.

lube.

screw.

adjust.

Cutting height linkage disconnected.

Check that m wer li kage is connected.

Mower cut is

Rider tires not inflated equally or perly.

See Ma n enance Section.

uneven.

Mower not leveled properly.

See "Mower Leveling" in Service & Adjustments.

Mower cut is

Engine speed too sl w.

Always set engine speed to FAST when mowing.

rough looking.

Ground speed too fast.

De rease ground speed.

 

Blades are dull.

Sharpen or replace blades. See Maintenance

 

 

Section.

 

Mower drive belt slipping because it is ily or

Clean or replace belt as necessary.

 

worn.

 

 

 

 

 

Blades not properly fastened to a bo s.

See "Check/Replace Mower Blades" in Maintenance

 

 

Section.

 

 

 

Engine stalls

Engine speed too slow.

Always set engine speed to FAST when mowing.

easily with

 

 

Ground speed too fast.

Decrease Ground Speed.

mower engaged.

 

 

 

Cutting height set too low.

Cut tall grass at maximum cutting height during first

 

 

pass.

 

 

 

 

 

 

 

Discharge chute jamming with cut grass.

Cut grass with discharge pointing toward previously

 

 

cut area.

 

 

 

Excessive

Blade mounting nuts are loose.

Torque as per instructions. See Maintenance

mower

 

Section.

vibration.

 

 

Mower blades, arbors, or pulleys are bent.

Check and replace as necessary.

 

 

 

 

Mower blades are out of balance.

Replace or balance blades. See Maintenance

 

 

Section.

 

 

 

 

Belt installed incorrectly.

Reinstall correctly.

 

 

 

Mower drive belt

Idler pulley spring broken or not properly

Repair or replace as needed.

slips or fails to

attached.

 

drive.

 

 

Mower drive belt broken.

Replace drive belt.

 

 

 

 

PTO clutch out of adjustment.

Adjust PTO clutch. See Maintenance Section.

 

 

 

41

Page 41
Image 41
Axion ZT18533, CZT2142 manual Troubleshooting the Mower

ZT2142, CZT2142, ZT18533 specifications

The Axion ZT18533, ZT2142, and CZT2142 are prime examples of advanced agricultural technology, designed to enhance operational efficiency and productivity on the farm. These versatile machines represent a significant leap in the integration of power and precision farming practices.

The Axion ZT18533 is equipped with a robust engine, providing exceptional horsepower and torque for demanding farm tasks. This model boasts a high-performance transmission system that ensures seamless power delivery, allowing operators to tackle varied terrain effortlessly. Key features include advanced GPS steering technology, which enhances navigation accuracy, while the intuitive control interface ensures ease of use for operators of all experience levels.

Similarly, the ZT2142 model shines with its innovative engine design, featuring stringent emission controls to comply with modern environmental standards. This model places a strong emphasis on fuel efficiency, offering innovative technologies such as common rail fuel injection that optimize fuel delivery for improved performance. The spacious cab design, complete with ergonomic seating and controls, ensures maximum operator comfort during long operating hours, promoting productivity.

In the case of the CZT2142, this model elevates the standard with its incorporate smart technology. It features real-time monitoring systems that provide critical data on engine performance, allowing for proactive maintenance and reduced downtime. The CZT2142 is also equipped with an advanced hydraulic system that provides exceptional lift capacity and versatility in attachment use, making it suitable for various farming applications.

All models feature cutting-edge safety technology, including rollover protection and enhanced visibility through strategically designed cab windows. The integration of telematics systems across these models allows for remote monitoring and diagnostics, further contributing to efficient fleet management.

Overall, the Axion ZT18533, ZT2142, and CZT2142 represent a comprehensive solution for modern agriculture. Their blend of power, efficiency, and advanced technology makes them indispensable tools for farmers looking to optimize their operations and enhance productivity in the field. With a focus on sustainability and innovation, these models are set to redefine the standards of agricultural machinery.