Axion ZT2142, ZT18533 Reproduction, Rider Maintenance Items, Accessing The Engine Compartment

Rider Maintenance Items

WARNING

Move the ground speed levers to START/PARK positions, engage the parking brake, turn the mower blades OFF, turn the ignition switch OFF, and wait for all moving parts to stop before accessing the engine compartment or performing any maintenance procedures.

ACCESSING THE ENGINE

COMPARTMENT

Lift up on the back edge of the seat deck to access the engine compartment.

Figure 16. Accessing the Engine Compartment

CLEAN DEBRIS FROM RIDER AND				A	B
ENGINE COMPARTMENT	Reproduction
Service Interval: Before each use.
CAUTION: If debris is not removed from the engine
compartment and other hot surfaces, it creates a		ire
hazard. Before starting the unit at the beginning of		he
mowing session, remove any grass clippings, dir ,			orf
leaves, or other debris from the unit. Also clean ut the
engine compartment.
CLEAN DEBRIS FROM ENGINENot
COOLING AREAS AND AIR FILTER
Service Interval: Before each use.
CAUTION: If debris is not removed from the ngine
compartment and other hot surfaces, it creates a fire Figure 17. Engine Compartment
hazard. Before starting the unit at the beginning of the				A. Intake Screen
				B. Air Filter Cover
mowing session, lift the seat deck and clean any debris
from the intake screen on top of the engine (A, Figure
17), exposed engine cooling fins, and around the air filter
assembly. Also open the air filter cover (B) and remove
any debris that has accumulated in the air filter
compartment.

CHECK TIRE PRESSURE

Service Interval: 25 Hours.

Tire pressure should be checked periodically, and maintained at the levels shown in Figure 18. Note that these pressures may differ slightly from the “Max Inflation” stamped on the side-wall of the tires. The pressures shown provide proper traction, improve cut quality, and extend tire life.

Tire	Pressure
Front	18-20 psi (1,24-1,38 bar)
Rear	10-12 psi (,69-,83 bar)

Figure 18. Tire Pressures

20