SERVICE & ADJUSTMENTS

GROUND SPEED CONTROL LEVER ADJUSTMENT

The control levers have three adjustments:

To Adjust Control Lever Height: Pull the levers in across the operator’s lap to their DRIVE positions. Loosen the mount bolts (D, Figure 44) and raise or lower the levers to the desired position. Tighten the mounting bolts.(D).

To Adjust Control Lever End Gap: The control lever end gap (C, Figure 45) should be adjusted so that the levers do not contact each other when placed in DRIVE positions. Loosen the jam nut (A, Figure 44) and adjust the length of the carriage bolt (B) so that the levers do not contact each other. Repeat on the opposite side. Tighten the jam nut (A) to lock the carriage bolt in position.

C

A

D

B

E

To Adjust Operator Clearance: The space between the

Figure 44. Control Lever Adjustment

operator and the control levers can be increase by

 

A. Jam Nut

 

removing the lower mounting bolt (D, Figure 44), pivoting

B. Carriage Bolt

 

the lever forward, and reinstalling the capscrew through

C. Forward Sl

 

the control lever and forward slot (C). Repeat with the

D. Mount B l s

 

other ground speed lever.

 

E. Knob

 

 

for

 

SPEED BALANCING ADJUSTMENT

 

 

If the rider veers to the right or left when the ground

 

 

 

speed control levers are in the maximum forward

 

 

 

position, the top speed of the right lever can be balanced

 

 

by turning the adjustment knob (E, Figure 44). Lo sen

 

 

Not

 

 

C

the jam nut and turn the knob COUNTERCLOCKWISE

 

to increase speed or CLOCKWISE to decrease s eed.

 

 

Tighten the jam nut when complete.

 

 

 

CUTTING HEIGHT ADJUSTMENT

 

A

 

 

 

 

To increase the mower cutting height (raise the mower

 

 

deck), press the top of the mower cuttingReprodheight switch uction

HCueighttintg

(A, Figure 45) To decrease mower cutting height (lower

 

 

the mower deck), press the bottom of the switch. Mower

B

4 Hig

hCut

23

cutting height range is 3-3/4” to 1-1/2”. The cutting height

 

1

 

LowCut

 

 

gauge indicates the position of the mower deck.. The cutting height gauge (B) is located on the front of the rider, just behind the driver’s left leg.

PTO CLUTCH ADJUSTMENT

See CHECK / ADJUST PTO CLUTCH in the

Maintenance Section.

Figure 45. Cutting Height Adjustment

A. Cutting Height Adjustment Switch

B. Cutting Height Gauge

C. Control Lever End Gap

31

Page 31
Image 31
Axion CZT2142, ZT18533 manual Service & Adjustments, Ground Speed Control Lever Adjustment, Speed Balancing Adjustment

ZT2142, CZT2142, ZT18533 specifications

The Axion ZT18533, ZT2142, and CZT2142 are prime examples of advanced agricultural technology, designed to enhance operational efficiency and productivity on the farm. These versatile machines represent a significant leap in the integration of power and precision farming practices.

The Axion ZT18533 is equipped with a robust engine, providing exceptional horsepower and torque for demanding farm tasks. This model boasts a high-performance transmission system that ensures seamless power delivery, allowing operators to tackle varied terrain effortlessly. Key features include advanced GPS steering technology, which enhances navigation accuracy, while the intuitive control interface ensures ease of use for operators of all experience levels.

Similarly, the ZT2142 model shines with its innovative engine design, featuring stringent emission controls to comply with modern environmental standards. This model places a strong emphasis on fuel efficiency, offering innovative technologies such as common rail fuel injection that optimize fuel delivery for improved performance. The spacious cab design, complete with ergonomic seating and controls, ensures maximum operator comfort during long operating hours, promoting productivity.

In the case of the CZT2142, this model elevates the standard with its incorporate smart technology. It features real-time monitoring systems that provide critical data on engine performance, allowing for proactive maintenance and reduced downtime. The CZT2142 is also equipped with an advanced hydraulic system that provides exceptional lift capacity and versatility in attachment use, making it suitable for various farming applications.

All models feature cutting-edge safety technology, including rollover protection and enhanced visibility through strategically designed cab windows. The integration of telematics systems across these models allows for remote monitoring and diagnostics, further contributing to efficient fleet management.

Overall, the Axion ZT18533, ZT2142, and CZT2142 represent a comprehensive solution for modern agriculture. Their blend of power, efficiency, and advanced technology makes them indispensable tools for farmers looking to optimize their operations and enhance productivity in the field. With a focus on sustainability and innovation, these models are set to redefine the standards of agricultural machinery.