
AXIS Q1635 Fixed Network Camera
Access the Product
Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the mouse pointer.
Click the Center mode button and click in the image to center the camera view on that position. The center mode button could also be used to zoom in on a specific area. Click in the image and drag to draw a rectangle surrounding the area to be magnified. To zoom out, rotate the mouse wheel.
Click the Ctrl panel button to open the PTZ control panel which provides additional PTZ controls.
To view a specific view area or preset position, select it from the Source list.
Focus bar – Click on a position on the focus bar to set the focus position. This will disable the product’s autofocus. To
Iris bar – Click on a position on the iris bar to change the degree to which the iris is opened. This will disable the product’s auto iris. To
Important
Adjusting the iris position will affect the shutter speed and gain. The default setting is recommended.
The PTZ controls can be disabled under PTZ > Advanced > Controls, see Controls on page 34.
15