AXIS Q1635 Fixed Network Camera
Events
Actions
Available actions include:
•Day/Night Vision Mode – Set day mode (IR cut filter on) or night mode (IR cut filter off).
•Defog Mode– Set Defog Mode to On or Off. This action may be used to change between the modes automatically.
•Output Port – Activate an I/O port to control an external device.
•Overlay Text – Display an overlay text. See Use Overlay Text in an Action Rule on page 28.
•Play Audio Clip – See Audio Clips on page 31.
•PTZ Control
-Preset Position – Go to a preset position.
-Guard Tour – Start a guard tour. See Guard Tour on page 34.
•Record Video – Record video and audio to a selected storage. To record audio, use AAC audio encoding and make sure that audio is enabled in the selected stream profile.
•Send Images – Send images to a recipient.
•Send Notifications – Send a notification message to a recipient.
•Send SNMP Trap – Send an SNMP trap message to the operator. Make sure that SNMP is enabled and configured under System Options > Network > SNMP.
•Send Video Clip – Send a video clip to a recipient.
•Status LED – Flash the LED indicator. This can for example be used to validate triggers such as motion detection during product installation and configuration.
•WDR Mode – The WDR Mode can be turned on or off when the action rule is triggered.
Add Recipients
The product can send media files and messages to notify users about events. Before the product can send media files or notification messages, you must define one ore more recipients. For information about available options, see Recipient Types on page 43.
To add a recipient:
1.Go to Events > Recipients and click Add.
2.Enter a descriptive name.
3.Select a recipient Type.
4.Enter the information needed for the recipient type.
5.Click Test to test the connection to the recipient.
6.Click OK.
Recipient Types
The following recipients are available:
43
