AXIS Q1635 Fixed Network Camera
Hardware Overview
Status LED | Indication |
|
|
Green | Steady green for normal operation. |
|
|
Amber | Steady during startup and when restoring settings. |
|
|
Note
The Network LED can be disabled so that it does not flash when there is network traffic. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.
Network LED | Indication |
|
|
Green | Steady for connection to a 100 Mbit/s network. Flashes for network activity. |
|
|
Amber | Steady for connection to a 10 Mbit/s network. Flashes for network activity. |
|
|
Unlit | No network connection. |
|
|
Note
The Power LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.
Power LED | Indication |
|
|
Green | Normal operation. |
|
|
Amber | Flashes green/amber during firmware upgrade. |
|
|
Status LED Behavior for Focus Assistant
Color
Green
Amber
Red
Indication
Focus Assistant is enabled
The lens is optimally adjusted
The camera has been moved, or an object has been inserted in front of the lens. Exit and restart the Focus Assistant.
The lens is less optimally adjusted.
The camera has been moved, or an object has been inserted in front of the lens. Exit and restart the Focus Assistant.
The lens is poorly adjusted.
Buzzer Signal for Focus Assistant
Buzzer
Fast interval
Medium interval
Slow interval
Lens
Optimally adjusted
Less optimally adjusted
Poorly adjusted
Status LED Behavior and Buzzer Signal for Levelling Assistant
For information on the Function button used for levelling the camera, see Connectors and Buttons. Press and hold the function button (2) for more than two seconds to level the camera.
•When the camera is level, both LEDs are steady green, and the beep is continuous.
9
