Ayre Acoustics DX-7 owner manual Dolby Digital Out Dolby Digital

Audio1 Audio2 Video Language General

Dolby Digital Out Dolby Digital

DTS Out - Dolby Digital￿PCM 96kHz PCM Out – 96kHz

MPEG Out – MPEG￿PCM Digital Out – On

Move SETUP Exit

Audio1 Audio2 Video Language General

Dolby Digital Out – Dolby Digital

DTS Out Off

96kHz PCM Out - DTS MPEG Out – MPEG￿PCM Digital Out – On

Move SETUP Exit

Dolby Digital

Nearly all DVDs have a Dolby Digital soundtrack (and optionally others as well). If your audio processor accepts Dolby Digital signals, set this option to “Dolby Digital”. The audio processor will decode the Dolby Digital signal to recreate the soundtrack.

If your audio processor does not accept Dolby Digital signals, set this option to

“Dolby Digital > PCM”. The DX-7 will then decode the Dolby Digital soundtrack and convert the audio signal to two-channel PCM.

This setting only affects the “Compressed + PCM” output. The “PCM Only” output will always convert a Dolby Digital soundtrack to two-channel PCM.

DTS

A few DVDs have a soundtrack using technology from DTS in addition to the Dolby Digital soundtrack. When present, the DTS soundtrack will usually offer somewhat improved sound quality compared to the Dolby Digital soundtrack.

If your audio processor accepts a DTS signal, set the DTS option to “DTS”. Otherwise set the DTS option to “Off”. The Ayre DX-7 will not convert a DTS soundtrack to PCM. If your audio processor does not accept a DTS signal, instead select the “Dolby Digital” soundtrack.

51