Ayre Acoustics DX-7 owner manual Video Hardware Configuration

Setup and

Configuration

HVSync RGB Prog Rsrv C 0% 16 - 235 RGB Rsrv A

SoG YPbPr Intrlc Rsrv D 7.5% 0 - 255 YCbCr Rsrv B

Once you have connected the Ayre DX-7 to your home theater system, you will need to configure it to ensure compatibility. There are two separate configuration steps – the video hardware configuration using small toggle switches on the rear of the unit, and the software configuration using an on-screen Setup Navigator.

Perform the video hardware configuration first so that the on-screen menus will display properly.

Video Hardware Configuration

Next to the DVI connector on the rear panel of the DVD player is a bank of eight small toggle switches. These are used to configure the video output signal to properly match your display device. Two of these switches are used to configure the DVI output, three are used for the component output, and one is used for both the S-video and composite outputs. Two switches are reserved for future use.

8