Ayre Acoustics DX-7 owner manual Audio, Digital Output

Audio1 Audio2 Video Language General

Dolby Digital Out – Dolby Digital

DTS Out – DTS 96kHz PCM Out – 96kHz

MPEG Out – MPEG￿PCM

Digital Out On

Off

Move SETUP Exit

This setting only affects the “Compressed + PCM” output. The “PCM Only” output will always convert an MPEG audio soundtrack to two-channel PCM.

Digital Output

The digital audio output may be turned off for diagnostic purposes. It is normally recommended to set this option to “On”.

This setting affects both the “Compressed +

PCM” output and the “PCM Only” output.

Audio1 Audio2 Video Language General

Audio DRC	High
	Medium
	Low
	Off
Move
		SETUP	Exit

Audio 2

The Audio 2 setup tab only contains a single menu option. This is not a one-time setting to match your system, but rather an adjustment that can be made to the audio playback.

“Audio DRC” stands for “Audio Dynamic Range Compression”. Normally this option should be set to “Off”. However, if you are watching a film late at night and wish to avoid disturbing other members of your household, then Audio DRC may be turned on. Soft sounds such as dialog can then be heard more clearly without increasing the volume of the loud sounds.

Audio DRC only applies to discs with a Dolby

Digital soundtrack.

53