MAC2000 | Operation |
•Total Flush ........Time spent flushing and number of times it was performed
•Recovered .........Total amount of refrigerant recovered
•Charged ............Total amount of refrigerant charged
•Added ................Total amount of refrigerant transferred from the external virgin tank to the internal storage tank
•Filter life left .....Weight of refrigerant that can be charged before
the Filter Dryer needs replaced
Pressing Next again displays the “Job history” screen, which contains the history of each job performed. A technician can press the UP and Down keys to scroll through the last 75 jobs.
Tips: Holding down the Up or Down key speeds up scrolling.
The total screen can be cleared by entering the
Job history can be cleared by entering the
3.8Internal Tank Manual Refill
When the MAC2000 remains turned ON during the day, the unit automatically refills the internal tank with refrigerant from the external source tank. An operator, however, can manually add refrigerant as follows:
1.If not already done, plug the MAC2000 into a properly grounded AC outlet; set the Power switch to ON; then wait until the unit completes its self diagnostics. The screen will display “Select mode” when ready.
2.Press the Next menu function key to display Menu 2. Then press the Tank refill function key to begin the refill process.
Note: If the tank is already filled with 12 lbs or more of refrigerant, then the message “Tank already full” appears.
3.Press the Start key to continue. The screen will then display “The internal tank is now being refilled.” When the internal tank is filled, the screen displays “Tank refill complete.”
4.Press the Reset key to return to the Main menu.
Instruction | 25 |