MAC2000 | Maintenance |
To replace the external source tank:
1.Close tank valve; remove yellow hose from tank valve; release tank strap; then remove tank from side of unit.
2.Place a new source tank on the shelf and secure it with the tank strap. The tank strap must be set up to supply liquid – this usually means the tank is inverted.
3.Reconnect the yellow hose to the tank fitting; then open the tank valve.
4.The unit’s automatic tank refill function will add refrigerant to the internal storage vessel as the unit is used. A technician may fill it immediately, however, by pressing the Next menu function key to display Menu 2, and then pressing the Tank refill function key to immediately begin filling the internal storage tank.
4.3Replacing the Printer Paper
1.Open the printer cover by first squeezing together the cover’s two plastic latches, and then pulling the cover forward.
2.Remove the old
3.Insert the new paper roll so that it unrolls
4.Close the printer cover.
5.Press and hold the feed button to ensure that the paper feeds properly; then tear off the excess paper.
Instruction | 31 |