Operation | MAC2000 |
3.9System Set Up
When the MAC2000 is initially turned on for the first time, the unit automatically enters its System
To change the data that was entered during the initial
1.If not already done, plug the MAC2000 into a properly grounded AC outlet; set the Power switch to ON; then wait until the unit completes its self diagnostics. The screen will display “Select mode” when ready.
2.Press the Next menu function key to display Menu 2. Then press the System
3.Follow the
•Time & Date
•Language
•Use Metric units (Yes or No)
•Calibrate Pressure Transducers (remove service hoses from the unit’s Service Hose Fittings and follow
•Elevation above sea level
•Clear error flags
•Clear job totals
•Clear job history
•Print data after every job
4.Press the Reset key at any time to save the settings and return to the Main menu.
3.10Identify Refrigerant
Before performing any maintenance work a technician can determine the following information about the vehicle’s refrigerant
•Whether the refrigerant in the A/C system can or cannot be recovered
•%
•%
•% R12
•% Air
•% HC (Hydrocarbons)
26 | Instruction |