Maintenance | MAC2000 |
4.4Replacing the Refrigerant Identifier Filter
Caution: Visually inspect the Refrigerant Identifier Filter every day. If it begins to turn red, replace it immediately! You risk damaging the identifier sensor if the filter is not replaced.
The refrigerant identifier filter is located on the control panel, directly under the Low Side pressure gauge. The filter’s function is to protect the refrigerant identifier sensor from contaminates. When this filter starts to develop red spots, replace the filter immediately!
1.Remove the filter from its holder; then remove the tubing from each end.
2.Position the new filter so that its
3.Attach the tubing to the new filter, and press the filter back into its holder.
32 | Instruction |
