BAD BOY™ SPOT LUMINAIRE USER MANUAL

Terminate/ Termination

Termination refers to the dampening of DMX signal at the end of the transmission line. Termination is created by placing a 100 ohm resistor between pins 2 and 3 of the DMX line. Often, there is a switch on DMX devices to do this internally. If not, a terminator is provided in the form of an XLR connector with the proper resistor between pins 2 and 3 to be placed in the DMX Thru port on the device.

Tilt

The movement of the luminaire around the axis of the tilt tube.

Time

Control of the duration of the change of the variable parameters of some automated luminaires and other

 

devices in a lighting system.

Timing

A Timing Channel is used in lieu of cue fade rate to determine the time it will take a luminaire to move from

Channel

one setting to another. For example, a cue in which a luminaire pans from one side of stage to the other may

 

look "steppy" if cue fade rate is used, because of the nature of the DMX512 signal. To overcome this, a

 

timing channel allows the luminaire to calculate the move "in time," effectively smoothing out the

 

movement.

Zero

Pan and Tilt values at 50%. Also called "Home Position" or a "50/50" cue or group.

Position

 

Zoom Table

Allows the fixture to maintain sharp focus on an image throughout the zoom range. (Note that zoom tables

 

are sensitive to throw distance. For this reason, a variety of zoom table versions are available for use with

 

different throws.)

8-Bit DMX

The universally accepted lighting control protocol in the entertainment industry. A console uses this protocol

 

to control specific devices in a lighting system. A DMX512 channel packet is eight bits of absolute parameter

 

data. 8-bit refers to the resolution of the signal: 256 step resolution, providing channel values from 0 through

 

255. A DMX512 data packet is a group of 512 data channels.

16-Bit DMX

To smooth out the movement of automated luminaires, the industry has adopted 16-bit DMX. This is not a

 

change to the DMX512 specification, rather a change in the way luminaires and consoles treat DMX512

 

information. In practice, 16-bit DMX adds a DMX512 channel each to pan and tilt - pan coarse, pan fine, tilt

 

coarse, tilt fine, instead of just pan and tilt. The console and luminaire combine these levels and increase the

 

resolution of pan and tilt from 256 steps to a theoretical maximum 65,536 steps at the console level, resulting

 

in the ability to position the luminaire more accurately.

92

02.9812.0001C

Page 102
Image 102
Bad Boy Mowers 02.9812.0001C user manual Movement of the luminaire around the axis of the tilt tube

02.9812.0001C specifications

Bad Boy Mowers has established itself as a premier manufacturer of innovative lawn care solutions, and the Bad Boy Mowers 02.9812.0001C model epitomizes their commitment to quality, performance, and user satisfaction. This commercial-grade mower is designed for those who take landscaping seriously, combining robust construction with advanced technologies.

One of the standout features of the 02.9812.0001C is its powerful engine, which typically boasts impressive horsepower, allowing it to tackle tough mowing tasks with ease. This model is engineered for longevity and reliability, ensuring that it can handle the demanding needs of professional landscapers as well as homeowners who want the very best for their lawns.

The 02.9812.0001C is designed with a wide cutting deck, often measuring 60 inches, allowing for efficient lawn coverage. This larger cutting width enables users to complete mowing tasks quicker, reducing the amount of time spent on the job. Additionally, the reinforced steel construction of the cutting deck provides durability and resilience, ensuring it can withstand the rigors of frequent use.

One of the key technologies incorporated into this model is its dual hydrostatic transmission system, which offers superior maneuverability and control. This feature allows users to easily navigate around obstacles and tight corners, providing a more precise mowing experience. The intuitive controls enhance the user experience, making it simple for operators of all skill levels to achieve desired results.

Another remarkable aspect of the Bad Boy Mowers 02.9812.0001C is its suspension system, which contributes to a smoother ride, reducing operator fatigue during extended use. This is especially beneficial when mowing uneven terrain, as the suspension effectively absorbs shocks and vibrations.

For enhanced comfort, the mower includes an ergonomic seat designed for maximum support, along with easy-to-reach controls for seamless operation. The model also features a commercial-quality air filtration system, ensuring optimal engine performance while extending maintenance intervals.

In summary, the Bad Boy Mowers 02.9812.0001C is an exceptional choice for those seeking a powerful, efficient, and user-friendly mower. With its advanced features, durable construction, and smart technologies, this model meets the demands of both professional landscapers and dedicated homeowners, making it a worthy investment for anyone serious about lawn care.