Bakers Pride Oven FH-28 Fire Extinguishing System, Fusible Links, Ventless Hood System

Ventless Hood System Installation

Fire Extinguishing System

In the event of an appliance fire, serious injury, property damage or death could occur if any part of the appliance obstructs the spray nozzles. Ensure that lids and/or other parts of the appliance do not obstruct the spray pattern of either nozzle.

The fire extinguishing system components used in this hood have been evaluated by U.L. in the course of their classification for use on this hood.

An authorized Range Guard® distributor must install and activate the filter hood fire extinguishing system. To locate an authorized Range Guard® Distributor use the following contact information:

Ronald Woodward Technical Service Specialist Badger Fire Protection 4251 Seminole Trail Charlottesville Va. 22911 Office: 800-446-3857 ext. 111 Fax: 434-974-4113

Mobile: 434-981-0505

1.After the hood has been properly secured to prevent movement, locate the end-of-line remote pull station (at a point of egress or exit) in a manner approved by the local authority and in accordance with applicable codes. To install the end-of-line remote, use ½” EMT and Range Guard® corner pulleys #97915.

2.Install two UL Listed; type “A”, 165° F. fusible links (load rating 3-45 lbs.) in the two appliance detector positions (one in front of the grease baffle, one behind the grease baffle).

FUSIBLE

LINKS

15