Bakers Pride Oven VGG-CO Extra, Rotisserie/Convection Oven, Operation, Screen Name, Description

Rotisserie/Convection Oven		Operation
Screen Name	Screen	Description
Preheat		Displays once the user touches the Preheat option from
		the Preheat/Cook Selection screen. The Preheat cycle
		heats the cooking cavity up to the pre-defined preheat
		temperature. Once this temperature is reached the unit
		automatically switches to the Ready To Cook mode. A
		small highlighted letter H will appear to the right of the
		temperature display to indicate that the controller has
		energized the heating elements. The absence of the
		letter H indicates that the controller has de-energized
		the heating elements as the oven temperature has
		reached the set temperature limit. The T button works
		as described for the Preheat/Cook Selection screen.
		Touching the X button for 3 seconds returns you to the
		Recipe Selection screen.
Ready to Cook		Displays once the user touches the Cook option from
		the Preheat/Cook selection screen or once the preheat
		cycle is finished or directly from the Recipe Selection
		screen if no preheat temperature was programmed.
		When the temperature is within 5° of the cook
		temperature the controller will emit three 2 second
		beeps indicating that the product can be loaded. The
		user places the product to be cooked into the cooking
		cavity and touches the COOK button to start the cooking
		process. If the door is opened and/or the temperature
		drops below 25° below the preheat temperature, the
		screen will flash and beep every 30 seconds until the
		COOK button is touched. The highlighted letter H works
		as described for the Preheat screen. The T button works
		as described for the Preheat/Cook Selection screen.
		Touching the X button for 3 seconds returns you to the
		Recipe Selection screen.

Cooking	RECIPE 02		Displays once the COOK button is touched from the
			Ready To Cook screen. This screen shows the cooking
		Time	temperature, the time remaining in the cook cycle, and
	H	0:50	the elapsed time shown with the progress bar at the
	T	EXTRA	bottom of the screen. Hold the X button for 2 seconds to
			stop the cook in progress. The EXTRA button can be
			used to add more cook time to the cycle. The cook cycle
			ends when the cook time elapses. This is indicated by
			three 2 second beeps. If a hold temperature was
			programmed then the Hold screen is displayed. If no
			hold temperature was programmed then the screen will
			flash and beep until touched. The highlighted letter H
			works as described for the Preheat screen. The T button
			works as described for the Preheat/Cook Selection
			screen. Touching the X button for 3 seconds returns you
			to the Preheat/Cook Selection screen.

11