146 LED-PRO • User’s Guide
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
LED-PRO Remote Commands
type [1-2], V Lock | HV Lock
•Query:
LCKMODE?
Returns the Lock To Source Mode and Type in the format
= mode type
SLCKMODE 1 2 (Enable Lock To Source and set Type to HV Lock)
SLCKMODE? (Queries Lock To Source Mode and Type)
i`hme^pb==Ü=
•Description: Sets Lock To Source Horizontal Phase
•Parameters: h - H Phase [ (-Input H Total/2) - (+Input H Total/2) ]
•Query:
LCKPHASE?
Returns the Lock To Source Horizontal Phase in the format
= h
SLCKPHASE 150 (Set Lock To Source H Phase to 150)
SLCKPHASE? (Queries Lock To Source H Phase)
l`kq=ååå
•Description: Adjust LED Wall Output Contrast.
•Parameters: nnn - Output Contrast (0% - 100%)
•Query:
OCNT?
Returns the Output Contrast in the format
= nnn
SOCNT 50 (Adjusts Output Contrast to 50%)
SOCNT? (Queries Output Contrast)
l`opq
•Description: Reset Output Configuration.
•Parameters: None
SOCRST (Reset Output Configuration)
l`p^s
•Description: Save Output Configuration to non-volatile memory.
•Parameters: None
SOCSAV (Save Output Configuration)
Note Command is only applicable when LED Wall Ctrl = Local.