LED-PRO • User’s Guide 155
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
LED-PRO Remote Commands
•Returns: MAC address. xx:xx:xx:xx:xx:xx
SEMAC? (Queries for Ethernet MAC address)
p_^ra=å
•Description: Adjust the Serial Baud Rate.
•Parameters: n - Serial baud rate: n[0-4] 1200 | 2400 | 9600 | 19200 | 38400
•Query:
SBAUD?
Returns the Serial Baud Rate in the format
= n
SSBAUD 0 (Adjusts Serial Baud Rate to 1200)
SSBAUD? (Queries Serial Baud Rate.)
pvp^s
•Description: Saves the System State into non-volatile memory
•Parameters: None
SSYSAV (Saves System State.)
ebim=xçéz
•Description: Displays Command List
•Parameters: op[A..Z] optional command
SHelp (Displays command list)
SHelp Freez (Displays syntax/parameters for the Freeze command)
il^ao
•Description: Places unit into loader mode. This mode is used to perform field
upgrades
•Parameters: None.
SLOADR (Puts unit into loader mode.)
obpbq
•Description: Factory resets the system and sets all settings to factory defaults.
•Parameters: None
SRESET (Factory reset the LED-PRO™)
t^iipq^ka_v
•Description: Set LED Wall to standby mode
•Usage: WALLSTANDBY [0|1] (0 = enable, 1 = standby)