Barco LED-PRO manual Pí~íìë=jÉåì=aÉëÅêáéíáçå, INtype Informat OUT gen1mode+src Wall status, Type

4. Operation

Using the Status Menu

pí~íìë=jÉåì=aÉëÅêáéíáçå

The Status Menu provides information about the currently selected system input (as determined by the input buttons) and the selected output. If the input is changed, the fields change accordingly. Other pertinent changes that you make within the menu system are shown, once you return to the Status Menu.

IN:<type>

<in_format>

OUT <gen1_mode+src>

<wall status>

Figure 4-11.Status Menu Fields

Following are descriptions of each variable field:

•<type>

Specifies the type of input signal being processed. Choices include NTSC/PAL/ SECAM, SDI, HD-SDI, RGB, YPbPr, or DVI.

•<in_format>

Indicates the current input video format in the following form:

Hact x Vact @ Vr Hz

S 1280x1024@60 Please note:

~If a “saved” user input configuration is used for the current input (as saved with the Save Config or Save System State functions), the field shows the name of the user input configuration — instead of the format. In this case, to view the format’s parameters, use the Input Menu (SETUP > Expert Mode > Input).

~

~

If the format itself is displayed, the input has not been saved.

If the currently selected input does not have a valid input signal, the message "Invalid Signal" is shown.

•<genl_mode+src>

Indicates the current “Lock to Source” mode and type (if locked), as set on the Lock to Source Menu (SETUP > Expert Mode > Output > Lock to Source). Refer to the “Lock to Source” section on page 83 for details.

Choices include:

~

~

~

Freerun — Not locked, freerun timing

HV Lock, Input — horizontal and vertical lock to input video

V Lock, Input — vertical lock to input video

If the unit is set for a particular “Lock to Source” mode and type, but that source is missing (or lock can not be achieved), the unit periodically attempts to lock. While

LED-PRO • User’s Guide 37