![](/images/new-backgrounds/1005562/5562121x1.webp)
4. Operation
Using the Setup Menu
p~íìê~íáçå
From the SDI Source Alignment Menu, select Saturation to adjust the saturation of the selected input.
•
•
The adjustment range is
100 is the default setting.
pÜ~êéåÉëë
From the SDI Source Alignment Menu, select Sharpness to adjust the sharpness of the selected input. This selection sets the scaler's sharpening (or softening) value.
•
•
The sharpening range extends from
0 is the default setting (which sets the scaler to its optimum sharpness).
`äáé=íç=pìÄ_äâ
From the SDI Source Alignment Menu, select Clip to SubBlk to eliminate low level noise in black regions of the image.
•
•
The adjustment range is 0 to
0 is the default setting.
iìã~=qê~ÅâáåÖ
From the SDI Source Alignment Menu, select Luma Tracking to prevent green haze from appearing in regions of low light.
•
•
The adjustment range is 0 to
0 is the default setting.
bafa=asf
From the SDI Source Alignment Menu, select EDID DVI to display the EDID DVI In Format Menu, which enables you to update
|
| 47 |
|