![](/images/new-backgrounds/1005562/5562145x1.webp)
4. Operation
Using the Setup Wizard
8.From the Set Wall Dimensions Menu, the Wall Data Connection Menu appears.
>How do the wall data cables connect? Horizontally Vertically Previous
Figure 4-36. Wall Data Connection Menu
~Select Horizontally if cables are connected horizontally.
~Select Vertically if cables are connected vertically.
~Select Previous to return to the previous menu in the wizard.
9.After selecting the correct data cable connection, the Tile Connection Menu appears.
>Looking at the wall from the front, the first tile connected to the
Bottom Right Next Previous
Figure 4-37. Tile Connection Menu (sample)
Highlight the correct connection point, and press SEL. Please note:
~In a standard tile array, choices are Bottom Right, Bottom Left, Top Right, and Top Left.
~In a horizontal tile array that is one tile in height, choices are Left or Right.
~If a vertical tile array that is one tile wide, choices are Top or Bottom.
10.Select Next to display the Rolling Grid Test Menu. During this interval, the system configures the wall, and displays a test pattern with diagonal motion.
|
| 59 |
|