Barco LED-PRO, 26-0501000-00 manual AÉäÉíÉ=`çåÑáÖ, Delete Config File, Råë~îÉÇ=`Ü~åÖÉë

4. Operation

Using the Expert Mode Menu

aÉäÉíÉ=`çåÑáÖ

From the Input Setup Menu, select Delete Config to display the Delete Config Menu, which enables you to delete any input configurations that were previously saved.

DELETE CONFIG > File 1

Delete Config

Figure 4-61.Delete Config Menu (sample)

„To delete an input configuration:

1.Scroll to the filename field (e.g., File1) and press SEL. The navigation cursor (>) changes to the edit cursor (#), allowing you to browse the file list.

2.Choose a file by turning the knob, and “accept” it by pressing SEL.

3.Scroll to the Delete Config line and press SEL to display the Delete Confirmation Menu.

~Press SEL to delete the configuration.

~Press ESC to return to the Delete Config Menu, enabling you to select a different file, or return safely to the Input Setup Menu (via ESC).

Note	If the deleted input configuration is currently used by any
	input channel, the system restores the format parameters to
	the default library values for those channels.

råë~îÉÇ=`Ü~åÖÉë

If you change any parameter within the Input Setup Menu, but you do not save the input configuration (using the Save Config function), the “Save Input Configuration” message will be shown when you attempt to exit the menu:

Save Input Cfg?

<SEL> = Yes

<ESC> = No

Figure 4-62.Save Input Configuration Message

~

~

Press SEL to save the changes. The Save Configuration As Menu will be shown. Refer to the “Save Config” section on page 107 for instructions.

Press ESC to continue operations without saving changes.

LED-PRO • User’s Guide 79