Barco LED-PRO, 26-0501000-00 manual What is the primary input source type? PAL Next

4. Operation

Using the Setup Wizard

12.Select Next to display the Input Type Menu:

What is the primary input source type?

>PAL Next

Figure 4-40.Input Type Menu (sample)

~Select PAL if your primary inputs are PAL.

~Select NTSC/PC if your primary inputs are NTSC or a PC. This completes the Setup Wizard procedure.

13.Select Next to save the new output configuration. The system displays the Input Wizard Query.

Would you like to setup Input(s)?

>Yes No

Figure 4-41.Input Wizard Query

~

~

Select Yes to launch the Input Wizard. Refer to the “Using the Input Wizard” section on page 62 for details.

Select No to exit and display the Status Menu.

Please note the following important points regarding special “automatic” Wizard settings:

•OLite LED Tiles

If you are using OLite tiles, the Setup Wizard has automatically set the “Creative Mode” (on the LED Menu) to Normal.

~To perform a complete “creative” setup instead, use the Director Toolset, and then enable the creative mode on the LED Menu.

~Refer to the “Creative Mode” section on page 103 for additional details.

•SLite and DLite LED Tiles

If you are using SLite and DLite tiles, the Setup Wizard has automatically set the “Tile Mode” (on the LED Menu) to Virtual.

~If you want to enable the “Real” mode instead:

•Select the Tile Mode function on the LED Menu, and select Real.

•Use the Expert Mode to set up H and V sizes on the output.

~Refer to the “Tile Mode” section on page 103 for additional details.

LED-PRO • User’s Guide 61