To Setup DHCP Server
There are 3 DHCP Modes:
•NONE
Select NONE if you do not wish to use a DHCP server.
•DHCP Server
Select this mode to setup a DHCP server.
•DHCP Relay
Select this mode to setup a DHCP relay.
By default, DHCP broadcast messages do not cross router interfaces.
DHCP Relay supports DHCP Clients and DHCP Servers on different networks by configuring the router to pass selective DHCP messages.
Follow these steps if you do not wish to use DHCP.
Step 1:
Click on Advanced Settings from Management Setup from the CONFIGURATION menu.
Step 2:
Set DHCP Mode to NONE.
Step 3:
Click on the Apply button.
Page 36
