Setup WAN for ADSL Internet using PPTP

If you subscribe to an ADSL service using Point-to-Point Tunneling Protocol (PPTP) authentication, you can set up your router’s WAN type from the steps that follow. For example, if the ISP provided you with the following set up information, you can set up your WAN as described below:

IP Address

:

203.120.12.47

Network Mask

:

255.255.255.0

VPN Server

:

203.120.12.15

1. Under the CONFIGURATION on the command menu, click on WAN Setup.

3.Fill in the information, followed by clicking the Apply button.

Select whether to enable DHCP.

Enter in the client IP Address.

Enter in the Network Mask.

Enter in the Gateway.

Enter in the Username of your Internet account.

Enter in the Password of your Internet account.

Enter the IP address of your VPN Server.

Enter an Idle Timeout value between 30-3600 seconds. Entering 0 will disable this feature.

The Idle Timeout setting allows you to specify the value (in seconds) after which the router will disconnect from the ISP after the last Internet activity. A value of “0” will disable idle timeout.

2.Access the Select WAN Type page and choose PPTP before clicking the Apply button. You will then be brought to the following page requiring your inputs.

Page 52

Page 57
Image 57
Compex Technologies NP25G 6C manual Setup WAN for Adsl Internet using Pptp, Enter the IP address of your VPN Server