Configure Bandwidth Control for LAN
Bandwidth Control allows you to decide the available bandwidth in levels of 1kbit.
Follow these steps to setup Bandwidth Control for LAN.
1
Click Bandwidth Control from the
CONFIGURATION menu.
2
Select whether to Enable or Disable Bandwidth Control and click Apply.
3
Click Add to add a Bandwidth
Control Entry
4
1.Enter the Bandwidth Control Rule Name.
2.Enter the Committed Rate in kbit. This sets the bandwidth committed.
3.Enter the Ceil Rate in kbit. This is the ceiling rate which sets the maximum bandwidth allowed.
4.Enter the Rule Type
Rule Types:
• Download by IP Address
• Download by MAC Address
• Upload by IP Address
• Upload by MAC Address
5.Enter the IP or MAC Address according to the Rule Type selected.
6.Click Add to add this Bandwidth Control Entry or click Cancel to cancel to disregard your entry.
Page 66
