Use Remote Management
The advanced network administrator will be delighted to know that remote management is supported on the router. With this feature enabled, you will be able to access the router’s
1. Under | the |
CONFIGURATION | |
command menu, click on | |
Remote | Management, |
and you will be brought to the following screen.
2.By default, Remote Management is disabled. (To disable Remote Management, just enter 0 for Remote Http Port).
3.To enable Remote Management, enter a port number that is not being used by other applications in the network. Please take note that it is recommended to use a different port number other than port 80 because some ISP block port number 80.
In view of preventing unauthorized management from a ! remote location, please remember to replace the default
password with a new one.
You are also advised to change this password from time to time to guard against malicious attackers.
Page 67
