Page 59
1. Under the CONFIGURATION
command menu, click on NAT.
You will find the Advanced NAT
Options available near the
bottom of the page.
2. Click the DMZ button to configure
Virtual Servers based on De-
Militarized Zone host.
3. On the NAT DMZ IP Address
page, you have to define the
Private IP Address of the DMZ
host. In this example, we keyed
in the private IP address for the
PC we wish to place within the
DMZ : 192.168.168.55
(Enter 0.0.0.0 as the Private IP
Address and it will disable
DMZ).
4. Remember to click the Apply
button.
! NOTE:
1. When you enable DMZ, the Static IP Address
configuration is recommended for the DMZ host.
Otherwise, if the address is allocated by DHCP, it may
change and DMZ will not function properly.
2. DMZ allows the host to expose ALL of its ports to the
Internet. The DMZ host is thus susceptible to malicious
attacks from the Internet.