________________________________________________________________________
▪Default mode is the default EDID as set the factory. Selecting this mode will restore the default EDID on the selected input channels.
▪Auto Mix mode is an advanced EDID mode. In the mode the unit reads all EDID of attached displays and creates and custom input EDID.
▪Output Copy mode reads the EDID from any selected output channel and copies it into an input port. Select the output channel first and then click the input channels. Click the Apply button to save settings.
▪Edit Data Mode is used to modify existing EDIDs or to make a new custom EDID. This feature is recommended for advanced users only.
Improper EDID setting can compromise the stability of the system. Not all computer graphics cards will be able to output a custom EDID resolution. Be sure you fully understand this feature prior to use.
For further information, please contact folsomsupport@barco.com
5.3 Operation
The communication settings and system status are on the right side of the control application as shown below. After clicking the Connect button (Refer to Chap. 4.1.1), the
27
User’s Guide | Rev. 01 |
