Barco 26-1302001-00 manual Command input structure, 1 Commands set

MatrixPRO-II DVI 16x16 Router

________________________________________________________________________

7 Commands

The MATRIXPRO-II DVI 16x16 router can be operated with various interfaces such as key button inputs, command input through RS-232 and TCP/IP, Web control through TCP/IP and PC program through RS-232 and UDP. All functions are executed on a basis of a serial command input, but the graphic interfaces on the Web or the PC program are more efficient ways to operate the MATRIXPRO-II DVI 16x16 modular matrix.

Command input operation is accomplished through RS-232 or TCP/IP. For setting procedures using those protocols, please refer to Chap 2 and Chap 3.

7.1Command input structure

The command inputs are composed of a string of ASCII codes and its basic structure is;

Command + Delimiter (‘=’) + Data + Delimiter (‘^’ or ‘,’ or ‘_’) + Data + End (‘!’)

Table 6.1 shows all commands and its brief descriptions

Command	Description
LINK	Input and Output connection
IN	Input signal status request
OUT	Output signal status request
NET	Network information request
NETGW	Gateway address setting
NETSN	Subnet mask address setting
NETIP	IP address setting
NETPA	MAC address setting
NETPT	UDP port number setting
VID	Video generator status request
MON	Monitoring port setting and status request
EDID	EDID mode setting
HDCP	Enable/Disable HDCP
RS232	RS-232 Baud rate setting
LOCK	Lock/Unlock the control type
	Table 7-1 : Commands set

▪The command input allows executing only one command. Multiple command inputs require executing multiple strings having each command per a string.

▪User can use capital letters and small letters for commands but cannot mix it like ‘Link’, it must be corrected as ‘link’ or ‘LINK’.

31

User’s Guide Rev. 01